The Heater System is an accessory commonly used to elevate temperature of an IVEK Pump Module or Sonicair Spray Nozzle. The Heater consists of a controller, cartridge heater and thermocouple. This can improve dispensing or spraying performance by lowering the fluid viscosity.

The temperature is digitally selectable on the front panel of the controller and the heater and thermocouple plug into connectors on the controller. These components provide closed loop feedback to keep the heated component at the preset temperature.

Features

• Temperature set through integral touch pad
• Temperature displayed in either °F or °C
• Temperature selectable to 250°F (121°C)
• Extended length custom heaters available
• Multi-channels available
• CE certificate available